PP Cartridge Prefilters
Product Characteristics
|
Product Specifications |
|
2.5 inch |
5 inch |
10 inch |
20 inch |
30 inch |
|
Nominal Dimensions |
69 mm*2.5″ |
69 mm*5″ |
69 mm*10″ |
69 mm*20″ |
69 mm*30″ |
|
|
Materials of Construction |
Membrane |
Polypropylene (PP) |
||||
|
Supporting layer/Housing |
Polypropylene (PP) |
|||||
|
O-rings |
Silicone、Ethylene propylene diene monomer（EPDM）、Ternary fluorine rubber |
|||||
|
Working characteristics |
Highest Working Temperature |
60℃ |
||||
|
Max Inlet Pressure |
5.5 bar（80 psi）@ 25℃ |
|||||
|
Sterilization Resistance |
Autoclave: 126℃，60min，30 cycles |
|||||
|
Max Differential Pressure |
Forward: 5.0 bar（72.5 psi）@ 25℃，Reverse: 2.0 bar（29 psi）@ 25℃ Forward: 4.0 bar（58 psi）@ 60℃，Reverse: 1.0 bar（14.5 psi）@ 60℃ |
|||||
|
Filtration Area |
0.12 ㎡ |
0.25 ㎡ |
0.5 ㎡ |
1.0 ㎡ |
1.5 ㎡ |
|
|
Pore Size |
0.1 μm/0.2 μm/0.5 μm/1.0 μm/3.0 μm/5.0 μm/10.0 μm/20.0 μm/50.0 μm/100 μm |
|||||
|
Connection Type |
226/222/215 |
|||||
|
Biological Safety |
All construction components meet the biological safety requirements refering to USP<88> Class VI plastic and USP<87> |
|||||
|
Cleanliness |
Meets the requirements for a ‘non-fiber releasing’ filter defined in FDA 21 CFR 211.72 and 210.3 (b) (5) (6), and particulate matter meets the requirements of USP<788> |
|||||
|
Endotoxin |
Endotoxin﹤0.25 EU/mL by LAL test method, which complies with the requirements of USP<85> |
|||||
|
TOC/Conductivity |
TOC﹤0.5 mg/L, Conductivity﹤1.3 μS/cm |
|||||
|
Quality System |
Manufactured in a facility whose Quality Management System has been certified with ISO 9001 |
|||||
|
Shelf Life |
3 years at 10-35℃ and below 70% humidity |
|||||
